3,178 research outputs found
Temperature Behaviour and Uniformity of SCT Barrels during Assembly and Reception Testing
This note presents temperature studies of the barrel SemiConductor Tracker (SCT) modules during the barrel assembly at Oxford University and the barrel reception at CERN. At Oxford, warm and/or cold tests have been performed on each of the four SCT barrels comprising a total of 2112 silicon strip modules. After macro-assembly, the barrels were shipped to CERN where reception tests took place before the inner detector integration phase. We present the temperature uniformity of the different barrels under changing operating conditions. Estimates of the errors contributing to the temperature measurements will be discussed. We introduce corrections for several systematic effects. We finally identify modules operating at higher temperatures and discuss possible reasons for their deteriorated thermal performance
The CLEO-III Ring Imaging Cherenkov Detector
The CLEO-III Detector upgrade for charged particle identification is
discussed. The RICH design uses solid LiF crystal radiators coupled with
multi-wire chamber photon detectors, using TEA as the photosensor, and
low-noise Viking readout electronics. Results from our beam test at Fermilab
are presented.Comment: Invited talk by R.J. Mountain at ``The 3rd International Workshop on
Ring Imaging Cherenkov Detectors," a research workshop of the Israel Science
Foundation, Ein-Gedi, Dead-Sea, Israel, Nov. 15-20, 1998, 14 pages, 9 figure
The Cleo III Ring Imaging Cherenkov Detector
The CLEO detector has been upgraded to include a state of the art particle
identification system, based on the Ring Imaging Cherenkov Detector (RICH)
technology, in order to take data at the upgraded CESR electron positron
collider. The expected performance is reviewed, as well as the preliminary
results from an engineering run during the first few months of operation of the
CLEO III detector.Comment: 5 pages, 2 Figures Talk given by M. Artuso at 8th Pisa Meeting on
Advanced Detectors, May 200
The Cleo Rich Detector
We describe the design, construction and performance of a Ring Imaging
Cherenkov Detector (RICH) constructed to identify charged particles in the CLEO
experiment. Cherenkov radiation occurs in LiF crystals, both planar and ones
with a novel ``sawtooth''-shaped exit surface. Photons in the wavelength
interval 135--165 nm are detected using multi-wire chambers filled with a
mixture of methane gas and triethylamine vapor. Excellent pion/kaon separation
is demonstrated.Comment: 75 pages, 57 figures, (updated July 26, 2005 to reflect reviewers
comments), to be published in NIM
In situ micro gas tungsten constricted arc welding of ultra-thin walled 2.275 mm outer diameter grade 2 commercially pure titanium tubing
Ultra-thin walled cooling tubes for heat exchangers and condenser units have applications in multiple high-value manufacturing industries. Grade 2 commercially pure titanium (CP-2 Ti) requires far less mass to achieve the same mass flow handling abilities as stainless steel tubing yet it is more challenging to join, particularly at wall thicknesses less than 500 μm (termed ultra-thin walled tube). This paper presents a single-pass joinery method that produces reliable welds on 2.275 mm outer diameter (OD), 160 ± 10 μm wall thickness tubing with a service life of 20 of more years. This is achieved through an automated orbital gas tungsten constricted arc welding (GTCAW) process incorporating enveloping low-mass sleeves used in tandem with a buttressing internal gas pressure to support the molten metal and maintain consistent internal diameter inside the tube. The industrial applicability is demonstrated through the production of a 1:1 scale mock-up of a fixed geometry CO2 cooling circuit for a next-generation particle detector. The tensile strengths of the joints, 403.8 ± 4.2 MPa, exceed the tensile strength of the parent CP-2 Ti
Performance of the CLEO III LiF-TEA Ring Imaging Cherenkov Detector in a High Energy Muon Beam
The CLEO III Ring Imaging Cherenkov detector uses LiF radiators to generate Cherenkov photons which are then detected by proportional wire chambers using a mixture of CH and TEA gases. The first two photon detector modules which were constructed, were taken to Fermilab and tested in a beam dump that provided high momentum muons. We report on results using both plane and "sawtooth" shaped radiators. Specifically, we discuss the number of photoelectrons observed per ring and the angular resolution. The particle separation ability is shown to be sufficient for the physics of CLEO III
A Search for Charmless Decays
We have studied two-body charmless decays of the meson into the final
states , , , , , , and
using only decay modes with charged daughter particles. Using 9.7 million pairs collected with the CLEO detector, we place 90% confidence level
upper limits on the branching fractions, , depending
on final state and polarization.Comment: 8 pages postscript, also available through
http://w4.lns.cornell.edu/public/CLN
Correlated /\c-/\cbar production in e+e- annihilations at sqrt{s}~10.5 GeV
Using 13.6/fb of continuum two-jet e+e- -> ccbar events collected with the
CLEO detector, we have searched for baryon number correlations at the primary
quark level. We have measured the likelihood for a /\c+ charmed baryon to be
produced in the hemisphere opposite a /\c- relative to the likelihood for a
/\c+ charmed baryon to be produced opposite an anticharmed meson Dbar; in all
cases, the reconstructed hadrons must have momentum greater than 2.3 GeV/c. We
find that, given a /\c- (reconstructed in five different decay modes), a /\c+
is observed in the opposite hemisphere (0.72+/-0.11)% of the time (not
corrected for efficiency). By contrast, given a Dbar in one hemisphere, a /\c+
is observed in the opposite hemisphere only (0.21+/-0.02)% of the time.
Normalized to the total number of either /\c- or Dbar ``tags'', it is therefore
3.52+/-0.45+/-0.42 times more likely to find a /\c+ opposite a /\c- than a Dbar
meson. This enhancement is not observed in the JETSET 7.3 e+e- -> ccbar Monte
Carlo simulation.Comment: 19 pages, Latex, one figure separat
First Observation of barB0 to D*0 pi+pi+pi-pi- Decays
We report on the observation of B0bar -> D*0 pi+ pi+ pi- pi- decays. The
branching ratio is (0.30 +/- 0.07 +/- 0.06)%. Interest in this particular mode
was sparked by Ligeti, Luke and Wise who propose it as a way to check the
validity of factorization tests in B0bar -> D*+ pi+ pi- pi- pi0 decays.Comment: 11 pages postscript, also available through
http://w4.lns.cornell.edu/public/CLNS, Version to appear in Phys. Rev.
- …